3-phase 1200V/100A SiC MOSFET IPM enters avionics

April 14, 2016 //By Julien Happich
CISSOID has delivered its first prototypes of a 3-phase 1200V/100A SiC MOSFET Intelligent Power Module (IPM) to Thales Avionics Electrical Systems.

Developed with the support of Clean Sky Joint Undertaking,  the module aims at increasing power converters density, by decreasing weight and size, for power generation and electromechanical actuators in More-Electrical Aircrafts.

For this Aerospace module, a 3-phase power inverter topology was selected while other topologies are being investigated for HEV and railways projects. Each of the 6 switch positions includes a 100A SiC MOSFET transistor and a 100A SiC Schottky free-wheeling diode. These devices can block voltages up to 1200V, which provide enough headroom against overvoltages in a 540V Aerospace DC bus, and the module is designed to be easily upgraded with 1700V/150A SiC devices. The transistors have a typical On resistance of 12.5mOhms or 8.5mOhms depending on their current rating, either 100A or 150A.

All the materials have been selected to allow reliable operation at high junction temperatures, up to 200°C with peaks at 225°C, in order to decrease cooling requirements. This materials selection also enables high case and storage temperatures, up to 150°C. Finally, the module is based on high-performance materials such as AlSiC baseplate, AlN substrates and Silver Sintering in order to offer near perfect CTE matching with SiC devices and high robustness against thermal and power cycling.

Co-designing the gate driver with the power module in a single IPM allowed CISSOID to optimize the gate driver circuit taking into account parasitic inductances of the power module while minimizing them when possible. Minimizing parasitic inductances allows to switch SiC transistors faster and to lower switching losses. An IPM also offers a plug-and-play solution to power electronic designers who save a lot of time in the design of the gate driver board, which is particularly challenging with SiC transistors. They can then focus on the design of high density power converters taking advantage of SiC.

Visit CISSOID at www.cissoid.com

Related article:

Isolated gate driver operates at up to 225°C