This device is targeted at the automotive, industrial and instrumentation markets with end applications to include infotainment, instrument clusters, telematics, amplifiers, and control modules.
A4450 is suitable for automotive input environments where battery input voltage supply can vary above and below the required output voltage and a single- inductor/single-stage conversion is desired. The wide input operating voltage range of 3 to 36V makes the A4450 suitable for a range of automotive infotainment applications and handles idle stop/start, cold crank, double battery and load dump conditions. The device has a high-voltage battery compatible enable (EN) input to accommodate switched battery input applications.
The A4450 provides regulated output voltage ranging from 3 to 8V with load current of up to 1A DC. The PWM switching frequency range is 250 kHz to 2.4 MHz, and frequency dithering and controlled switching transitions minimise EMI. The A4450 maintains stability even when the input and output voltages are at nearly the same level as well as through line and load transient events.
Protection features include pulse-by-pulse current limit, hiccup mode short-circuit protection, LX short-circuit protection, missing freewheeling diode (buck diode at LX node in A4450). The enable input is compatible to a high-voltage battery level, and a power-on reset output (NPOR) is integrated.
The device is available in a 20-lead, 4 x 4 mm QFN package (suffix “ES”), which is “wettable flank” and AEC-Q100 qualified.
Allegro MicroSystems; www.allegromicro.com