Board slashes Cortex-M4-based display interface development

July 19, 2018 // By Julien Happich
Inelco Hunter's Powertip Development Board was specifically designed for Cortex-M4 processor applications where a display screen interface is required. 

With a built-in 22-pin GPIO interface compatible with Powertip 4 in 1 Series TFT 3.5”, 4.3”, 5” and 7” displays and supporting any display with a resolution of up to RGB 1024x768 using the same industry-standard GPIO interface, the board is tailor-made for Cortex-M4 STM32F429IGT6 processors and can provide huge cost-savings by slashing development time. Simply plug-in the display, connect the power and the development engineer can start development work straight away.

Twelve Powertip 4 in 1 Series Displays are compatible with the development board, some with CTP/RTP touch options. They can be operated using with a finger touch or a stylus and allow for Zoom, Rotate, Flick and Swipe actions. The board includes a 180MHz Cortex-M4 STM32F429IGT6 processor; 8MB SDRAM; 16MB SPI Flash; and 1x Micro SD (under 32G). Interfaces include: 1x USB2.0 Host; 1x RS485 or RS232; CAN BUS 2.0B Active; and Ethernet IEEE 1588v2. The power input is DC 7V ~ 36V. EMI/EMS protection is provided and V-com, B/L drivers are included as standard.

Inelco Hunter -  www.inelcohunter.co.uk


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.