Duke chemist Ben Wiley and his graduate student have developed a technique to organize copper atoms in water to form long, thin, non-clumped nanowires. The nanowires are then transformed into transparent, conductive films and coated onto glass or plastic. The new research shows that the copper nanowire films have the same properties as those currently used in electronic devices and solar cells, but are less expensive to manufacture. The films that currently connect pixels in electronic screens are made of indium tin oxide, or ITO. It is highly transparent, which transmits the information well. But the ITO film must be deposited from a vapour in a process that is a thousand times slower than newspaper printing, and, once the ITO is in the device, it cracks easily. Indium is also an expensive rare earth element, costing as much as $800 per kilogram.
A new flexible film made of copper nanowires and plastic conducts electricity illuminating a small light bulb. Credit: Ben Wiley, Duke University.
These problems have driven worldwide efforts to find less expensive materials that can be coated or printed like ink at much faster speeds to make low-cost, transparent conducting films, Wiley said. One alternative to an ITO film is to use inks containing silver nanowires. The first cell phone with a screen made from silver nanowires will be on the market this year. But silver, like indium, is still relatively expensive at $1400 per kilogram. Copper, on the other hand, is a thousand times more abundant than indium or silver, and about 100 times less expensive, costing only $9 per kilogram.
In 2010, Wiley and his graduate student Aaron Rathmell showed that it was possible to form a layer of copper nanowires on glass to make a transparent conducting film. But at that time, the performance of the film was not good enough for practical applications because the wires clumped together. The new way of growing the