Four-channel analog voltage measuring module samples to 100kHz

February 09, 2016 // By Julien Happich
Ipetronik extends its measuring module family of the Mx- and Sx-series with the Mx-SENS2 4, a X-LINK module for voltage measurements of up to ±100 V and ICP measurements.

The four-channel analog measuring module with sensor supply combines high sampling rates of up to 100 kHz per channel with time-synchronic data acquisition and ICP-mode for piezoelectric sensors, such as acceleration / vibration and acoustic sensors. Optionally, TEDS sensor detection is supported.

The four analog inputs cover ten measuring ranges with voltage of ±0,01 V up to ±100 V. The inputs are voltage proof up to ±500 V. Each input has its own adjustable sensor supply of up to ±15 V with up to ±60 mA. Designed in a IP67-rated 106x60x62mm aluminium housing and operating from -40°C up to +105°C with a relative humidity of 5 to 95 %, the module supports channel sampling rates from 10 kHz up to 100 kHz.

The data output stream runs with maximum 100 Mbit/s on Fast Ethernet via XCPonEthernet or via CAN-2.0B bus with up to 1 Mbit/s. All measuring inputs, CAN bus, power supply and housing, are completely galvanically isolated from each other.

Visit Ipetronik at