Ivy Bridge packs 20 channels of PCI Express Gen 3 interconnect and a Displayport controller, Intel’s first chip to integrate PCIe. The move marks one small step into the long term quest of what an Intel executive called terascale-class clients.
The first Ivy Bridge chip targets a range of desktop, notebook, embedded and single-socket server systems with up to 8 Mbytes cache. Like previous Intel parts it integrates a memory controller and graphics, now upgraded to support DDR3L DRAMs and Microsoft DirectX 11.0 graphics APIs.
“We spent a lot of time on the modularity of this die to create different flavors of it very quickly,” said Scott Siers, an Intel engineer who presented a paper on the chip at the International Solid-State Circuits Conference.
Specifically the largest die includes four x86 cores and a large graphics block. It can be chopped along its x- and/or y-axis using automated generation tools to create versions with two cores or a smaller graphics block.
Siers said Ivy Bridge is Intel’s first client chip to support low power 1.35-V DDR3L and DDR power gating in standby mode. It handles up to 1,600 MTransfers/s as well as 1.5V DDR3. A new write assist cache circuit provides an average 100 millivolt power reduction.
The Displayport block supports three simultaneous displays including one 1.6 GHz and two 2.7 GHz links with four lanes each.
The PCIe receiver uses a continuous time linear equalizer with 32 gain control levels and a transmitter with a three-tap digital FIR filter. The PCIe block also supports on die testing for jitter as well as timing and voltage margin measurements.
The chip’s x86 and graphics cores can scale in data rates at 100 and 50 MHz increments respectively. Overall, the chip supports five power planes and 180 clock islands that can be separately gated.
In a separate ISSCC keynote, Dadi Perlmutter, chief product officer for Intel, scoped out a long term vision