Power line inductor for automotive PoC interfaces

December 13, 2017 // By Nick Flaherty
Murata has introduced a series of inductors for automotive Power Over Coax (PoC) designs that save on PCB space and reduce component count and weight.

PoC is increasingly used with SERializer/DESerializer (SerDes) equipment in automotive applications in order to reduce weight by deploying a single coax cable to transfer power and image data to and from an onboard camera. In previous PoC implementations, several large and small impedance inductors were needed to handle the broadband signal at the circuit processor and to maintain high impedance over a wide bandwidth to separate the signal and power.

The LQW32FT series allows a single inductor to replace the multiple components that were previously necessary. This supports efforts to save space and reduce the overall size of a system, and to lower the total DC resistance. 

The inductors provide high impedance over a wide target frequency bandwidth range of 4 MHz – 1 GHz for the 47μH version in a 1210-inch size (3.2 × 2.5 mm) surface mount package. The inductor also features a very wide -55 to 125 °C maximum environmental temperature range capability, making it eminently suitable and very robust for automotive circuits.

The LQW32FT series will be expanded to support further high-speed signal transmission applications as needed in this emerging market. Mass production began in November 2017.


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.