Researchers define ReRam switching characteristics

August 24, 2016 //By Christoph Hammerschmidt
Resistive RAM (ReRAM) devices consume much less energy and are much faster than competing FLASH memory technology. But the computer revolution must wait: The ReRAM switching processes are not yet understood well enough for mass production. Now the science community is one step closer to ReRAM industrialization: A interdisciplinary team of researchers has developed a method to exactly acquire and define what happens during the switching process.

ReRAM memory chips or memristors have a number of properties that could make them strong contenders to existing technologies. Besides being very fast and energy-efficient, they scale very well and can be miniaturized well into the nanometer range. In contrast to today’s DRAMs, ReRAMs are non-volatile – they keep their data content even when they are switched off; booting computers could become a matter of milliseconds.

The function of memristive cells is based on a very specific physical effect: Their electric resistance is not constant but instead can be controlled through an external voltage. For instance, low resistance could be associated to a logical 1 while high resistance would be a logical 0.

At the physical level, the change of the electric resistance is caused by the movement of oxygen atoms: If they move out of the semi-conducting metal oxide layer, the material becomes conducting. Hitherto however the number of oxygen atoms to be moved to achieve the effect was widely unclear. Now the researchers at the Jülich Research Center succeeded in solving this question and explaining what actually is going on in such a memory cell during operation.

“Though first memristive memories are available at the market for some three years, their dimensioning was based widely on experience”, explains Regina Dittman from the Jülich Research Center’s Peter Grünberg Institute. According to Dittmann, the switching processes are occurring within tiny filaments. Such processes can be proved by photo emission microscopy, albeit this possibility was restricted to near-surface phenomena. The active area of ReRAM memory devices lies beneath a metal electrode and thus it so war was not possible to observe them during the switching process.

The solution to this problem lies in a material: Graphene. ”This nanomaterial forms a layer of carbon atoms that is just one atomic layer thick”, Dittmann explained. “Nevertheless it is just as conductive as a rather thick layer of metal. Since it is so thin we can look through it with our photo emission microscope.”