Round integrated colour display module with touch interface, Android-ready

September 12, 2017 // By Julien Happich
Farnell element14 has introduced an integrated colour display module with touch interface, along with the Android SDK (software development kit), for the WaRP7 development platform.

The WaRP7 LCD module incorporates a standard MIPI display with DSI (display serial interface) and I2C (inter-integrated circuit) interfaces, and is designed specifically for use with WaRP7 products. The screen is round and has an active area diameter of 31.9 mm with 320 RGB × 320 dots resolution and a power consumption of 226mW.

The WaRP7 is designed to speed and ease the development of IoT and wearable devices by addressing technology challenges and freeing developers to focus on creating differentiated features. The platform consists of a main board and a daughter card. The main board is based on the NXP i.MX 7Solo application processor, and features an advanced implementation of the ARM Cortex-A7 core as well as the Cortex-M4 core.

The unique heterogeneous multicore architecture of the WaRP7 not only enables low-power modes critical for most designs, but also provides the power to drive a higher level operating system and a rich user interface. The daughter card is based on a flexible design with sensors collecting a range of data and the MikroBus expansion socket accessing over 200 Click Boards for users, allowing rapid prototyping across all potential IoT and wearable ideas.

Farnell - www.premierfarnell.com