0˚ to 360˚ angle sensor ICs with advanced diagnostics

0˚ to 360˚ angle sensor ICs with advanced diagnostics

New Products |
By Julien Happich

The A1337 and A1338 devices have a system-on-chip (SoC) architecture that includes: a CVH front end, digital signal processing, and digital SPI and SENT or PWM outputs.  They also include on-chip EEPROM technology, capable of supporting up to 100 read/write cycles, for flexible end-of-line programming of calibration parameters. Both devices are suitable for automotive applications requiring 0˚ to 360˚ angle measurements, such as electronic power steering (EPS), seatbelt motor position systems, rotary PRNDLs, and throttle systems. The A1338 is also well suited for industrial motor position sensing applications that require high accuracy and minimal latency as well.

The A1337 and A1338 devices were designed with safety-critical application requirements in mind.  They include user-controlled, on-chip logic built-in self-test (L-BIST) and full signal path diagnostics to enable customers to determine if the IC is operating properly. Both devices support a Low RPM mode for slower rate applications and a High RPM mode for high-speed applications. The A1337 device also includes integrated Turns Counter and Low-Power Mode functions. The Turns Counter function allows the device to keep track of either 45˚ or 180˚ turns of the motor when the part is in Low-Power Mode, allowing it to keep track of the motor position even when the vehicle is in the key-off state. The chips come in a single-die, 14-pin TSSOP and a dual-die, 24-pin TSSOP. 

Visit Allegro MicroSystems at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles