1-phase EMC filter addresses AC and DC applications
Suitable for applications up to 277 VAC as well as 400 VDC, the FMAB HV EMC filter filter family offers the greatest possible flexibility for various applications where mixed AC and DC power supplies are used for better energy efficiency and/or improved reliability. The new filter series has a shiny steel housing with a closed filter base and is particularly suitable for devices with high symmetrical interferences, such as devices with semiconductors, which regulate high outputs (e.g. commercial coffee machines, hot water dispensing machines, and all types of industrial electronics). The filters are available with quick connect terminals 6.3×0.8mm. They have a metal flange for easy mounting on the chassis. The entire filter family can be used over a temperature range from -40 to 100°C, designed for currents from 1A to 20A at 277 VAC / 277 VDC according to IEC standard and 277 VAC and 400 VDC according to UL/CSA standard. It has ENEC and cURus approval and is suitable for applications according to IEC 60950. For medical devices according to IEC/UL 60601-1, variants with low leakage currents under 80 μA (M80) or without leakage current (under 5 μA – M5) are available. Versions with built-in varistors for effective overvoltage protection are available on request.
Schurter – www.schurter.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
