10W PSU modules for Class 1 and Class 2 environments

10W PSU modules for Class 1 and Class 2 environments

New Products |
By Graham Prophet

Reduced stand-by power consumption of series PMAS10 is well under 1W, typically around 300 mW. Print Power modules are designed as universal compact power supplies with AC and DC wide input ranges and single output power of 5, 12, 15 or 24V for worldwide application. Their dimensions of 52.0 x 36.5 x 24.0 mm and the high packing density allow an efficient, cost-saving 10W solution for different tasks where low power is needed. The power supplies are prepared for applications in Class 1 and/or 2 and have a high efficiency of over 80%. The vacuum encapsulated modules are designed for PCB mounting. The basics for the high-quality standard of the whole series are SMD technology, automatic 100% final test and 100-%-burn-in-test. The Print Power modules PMAS10 series comply with the Low Voltage Directive as well as the up-to-date standards as regards CE conformity and are VDE and UL/cUL approved.


MTM Power;



If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles