125-Vdc output AC-DC power supply features universal input to tackle industrial applications
The supplies employ a power factor corrected input and a following half-bridge stage to convert the universal ac-input voltage (95 V to 264 Vac) to 110 Vdc, 125 Vdc or 150 Vdc output with fan cooling. DC-input versions are also available. The isolated, floating outputs can be grounded to either terminal, so that the unit can be used in either positive or negative grounded systems, or left floating. Alternatively, several units can be connected in series for higher voltage. An optional built-in redundancy diode is available to allow for paralleling and N+1 operation, or connection to a back-up battery. An optional Form C output fail alarm may also be installed.
The power supplies meet the EN61000-3-2 directive for active power factor correction, comply with EN/IEC60950-1 and meet the requirements for CE marking. Protection features include 4300 Vdc input/output isolation, overload, over-voltage and short circuit protection with thermal shutdown and self-resetting.
The PFH 53TF Series is suitable for a broad range of heavy-duty applications including industrial automation, power utilities and telecommunications. They can be installed on thermally non-conductive surfaces, such as plastic, as well as on curved or uneven surfaces. Installation on a heat-sinking surface is not required because the unit does not rely on conduction cooling.
Heavily ruggedized and conformal coated versions of this design are available for applications that require immunity to high levels of shock, vibration and/or humidity.
Pricing
Standard versions of the series are priced in the $318 range in quantities of 100.
Visit ABSOPULSE Electronics at www.absopulse.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
