2.0A, 2.5A and 3.0A power switches are designed for USB port protection
Supporting load currents of 2.0A, 2.5A and 3.0A, respectively, the AP22811 and AP22804/AP22814 devices protect USB ports against over-current, short-circuit and over-temperature conditions and prevents system damage due to reversed currents or voltages. Typical applications include laptop, notebook and tablet PCs, solid-state drives, set-top boxes and similar media devices, as well as various other items of consumer electronic equipment.
A typical RDS(ON) of 50mΩ ensures the AP22811/22804/22814 load switches have minimal voltage drop and power loss while also providing a fast response to fault conditions. The devices provide a built-in soft start with a 0.6s rise time and an integrated output discharge function controls the complete discharge of the output voltage capacitor. Fault protection is implemented with full auto-recovery and the open-drain fault report flag output (FLG), which requires no external components, and features a 6ms blanking time to prevent false over-current reporting.
The AP228xx device options allow for active-high or active-low enable inputs and all are offered in SOT-25 and MSOP-8 packages for ease of use. The AP22804 and AP22814 parts are additionally available in the DFN2020-6 package, which can help reduce board area. Unit pricing in quantities of 1000 ranges from $0.30 to $0.35 each
Further information is available at www.diodes.com
Related stories:
- ULTRA-LOW POWER SWITCH SLASHES STANDBY POWER
- 1800W TRANSIENT VOLTAGE SUPPRESSOR LAUNCHED
- IQE AND IMEC DEMONSTRATE 650V GAN-ON-SI POWER DIODES ON 200 MM WAFERS
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
