2-W DC-DC takes only half the space of predecessors
Murata’s MTU2 series of ultra miniature surface mounted 2W DC-DC converters measures 8.2 x 8.4 x 8.5 mm with a 0.69 cm2 footprint: it is 50% smaller than the current 1.67 cm2 industry standard.
With a typical conversion efficiency of 85% across the full load range and a power density of 3.403 W/cm3, the MTU2 series is available with either a single or dual output voltage. Input voltages cover the common nominal inputs from 3.3 to 24 VDC. Output voltage options include 5, 12, or 24 VDC. Dual output models provide ±5 or ±12 VDC. Load regulation is typically 5% better than other products available on the market, reducing the need for any additional regulation components.
The MTU2 has a 1 kVDC input/output galvanic isolation that helps to reduce switching noise and allows the converter to be configured to provide an isolated negative rail in systems where only positive rails exist.
The MTU2 can operate over the full industrial temperature range from -40 to +85 degrees C.
Murata Europe; www.murata.eu
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
