200W DC-DC module at up to 94.5%, in 1/8th brick outline
AVO200 series converters accept the telecommunication standard wide input range of 36 to 75 Vdc. The 12V model delivers up to 16.7A output current, while the 5 V model provides up to 40A output. Operating range is -40 to 85C, with open frame or baseplate design, allowing for conduction or forced airflow cooling.
Features include low ripple and noise, fixed switching frequency, high capacitive load capability, pre-bias start-up capability, output voltage remote sense. All variants are fitted with through-hole terminations. The converters are protected against overcurrent, over-temperature and over-voltage conditions. They also have an enable pin on the primary side of the converter and remote-sense features and output voltage adjust function on the secondary side. The industry-standard eighth-brick outline measures 58.4 x 22.9 x 9.6 mm for open frame and 58.4 x 22.9 x 12.7 mm for baseplate.
Artesyn Embedded Technologies; www.artesyn.com/power/power-supplies/websheet/549/avo200-series
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
