24-channel fiber FMC+ module supports 1344Gb/s
New Products
|
By
eeNews Europe
The module provides clock data recovery and front-panel fiber I/O via MTP/MPO. Transceivers for this module are available in two speed grades,10.6 Gb/s and 28.1 Gb/s per channel, both with multi-rate capability. The 10.6 Gb/s can drive 100m over OM3 MM Fiber and 28.1 Gb/s can drive 100 m over OM4 MM Fiber. The FMC259 also has an on board Ultra-Low Jitter Clock Generator with two independent, fractional PLL. The clocking allows synchronization to an external clock input or on board. Six clocks are routed to the GBT’s on the FMC+ pinouts and two are routed to CLK0 and CLK1 for a total of 8 clock outputs. Additionally, the module has LEDs in green/yellow to allow for LNK/ACT, debugging or as defined by user.
VadaTech – www.vadatech.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
