The standard stock versions have two output terminals: a Redundant via a built-in redundancy diode, and a Direct, which bypasses the redundancy diode. They can be used in Redundant or Direct operation, depending on application requirements. On the Redundant output, these converters can be used for redundant parallel or N+1 operation. The Direct output can be used for monitoring, precision regulation or to achieve higher efficiency. The 125 Vdc input version (90 V to 145 Vdc standard range) is available with 24 Vdc or 48Vdc standard outputs. A Form C output fail alarm is included in this design.
The calculated MTBF of the unit is above 150, 000 hours at 45 degrees C, with demonstrated figures expected to be higher, which is the case for the company’s other products. These rugged converters meet EN61373/IEC61373 shock and vibration standards; additional ruggedizing and conformal coating are available for operation in extreme environments. Other features include inrush current limiting, reverse polarity protection and rectangular, continuous current limiting with short-circuit protection (no hiccup). Thermal protection is by built in thermostat with self-resetting. Efficiency is 85% or higher, depending on the output configuration.
Standard versions of the BAP 190 series are priced in the $182 range in quantities of 100.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.