2A PXI fault insertion switches for automotive and avionics applications
The model 40-202 switches with with 22 or 11 fault insertion channels are specifically designed for differential signaling requirements. They can insert three different types of fault condition between the test fixture and the equipment under test; open-circuit, short-circuit between signal pairs and short-circuit to user applied fault conditions such as power or ground.
The new models complement Pickering’s large range of PXI Fault Insertion Switches, which are typically used in Hardware-in- the-Loop Simulation applications for Electronic Control Unit validation.
Relays in-line with the signal paths allow open circuit conditions to be simulated on either side or both sides of a signal pair. Relays between each channel pair enable adjacent signals to be shorted and relays between signal paths and the “Fault” connection allow the application of external fault conditions.
The topology of the 40-202 switches allows channels to be interconnected so that complex fault insertion channels can be constructed. These products are supported by Pickering’s eBIRST Switching System Test Tools, which provide a quick and easy way of finding relay failures within the modules. In addition, Pickering’s signal routing software, Switch Path Manager, may be used to simplify signal routing through complex switching systems.
The switches have a standard three-year warranty and guaranteed long-term product support.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
