2W and 3W DC-DC converters in SIP-8 package in distribution

2W and 3W DC-DC converters in SIP-8 package in distribution

New Products |
By Nick Flaherty

The TEC 2, TEC 2(WI), TEC 3 and TEC 3(WI) series  have all been designed to deliver improvements in terms of cost, efficiency and performance compared to previously available 2W and 3W SIP-8 packaged DC-DC converters. Offering increases in efficiency of more than 20%, the converters enable a significant reduction of thermal loss and thereby allow an expanded operating temperature range of –40 to +90°C.

The converters offer fully regulated outputs from zero to 100% load, with no requirement for minimum load. The input-voltage range options have also been extended and now include 4.5 to 13.2V(DC). Models are also available with standard 2:1 input ranges, including 9 to 18, 18 to 36 and 36 to 75V(DC). The TEC 2WI and 3WI series also offer devices with ultra-wide 4:1 input-voltage ranges.

Other features include functional I/O isolation designed to meet IEC/EN 60950-1 with a test voltage of 1600V(DC) for 60 seconds, continuous short-circuit protection and remote on/off. They have a three-year product warranty.

The Traco Power TEC 2(WI) and 3(WI) converters are now shipping from RS in the EMEA and Asia Pacific regions.

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles