350W convection cooled medical AC-DC power supply has 1kW peak
TDK has launched a 350W AC-DC medical power supply series that can deliver 1kW of peak power.
The TDK-Lambda brand CUS350MP series of AC-DC power supplies has medical and industrial safety certifications. The series is rated at 350W for convection cooling and 500W with forced air and can deliver up to 1,000W peak power. This makes the CUS350MP ideal for low audible noise applications requiring occasional high peak power demands, including medical equipment with DC motors and industrial printers.
The CUS350MP series accepts an 85 to 265Vac input and has a leakage current of less than 300µA. Four output voltages are available: 24, 30, 36 and 48V. A 5V 0.3A isolated standby voltage and remote on/off is fitted as standard. The typical full load operating efficiency is 94% with a 230Vac input. The operating ambient temperature is -20°C to +70°C, derating linearly above 50°C to 30% load. Including the baseplate, the open frame models measure 88 x 183 x 44mm (W x L x H) and weigh 770g. A cover, screw terminal connections, double-sided board coating and a single AC fuse are available as options.
The input to output isolation is 4,000Vac (2 x MoPP), input to ground 1,500Vac (1 x MoPP) and 1,500Vac (1 x MoPP) output to ground for suitability in B and BF rated medical equipment. Safety certifications include IEC/UL/CSA/EN 62368-1, IEC/EN/ES 60601-1, EN 62477-1 (OVC III), with CE marking to the Low Voltage, EMC and RoHS Directives.The units also comply with EN 55011-B and EN 55032-B conducted and radiated emissions, meet the EN 61000-3-2 harmonics, IEC60601-1-2 Edition 4 and IEC 61000-4 immunity standards.
Related AC-DC articles
- Power Trends: Industry 4.0 is key for TDK-Lambda
- TDK-Lambda in £11.5m factory revamp
- 600W medical power supply has 3 x 5in footprint
- 250W DIN rail power supply has wide input range
- TDK granted patent on scalable power
Other articles on eeNews Power
- UK’s first grid-scale battery connects
- 5kW 3-phase supply has no neutral
- First dedicated CrM totem pole PFC controller
- 20A DIN-Rail power supply integrates LED display
- Mitsubishi boosts IGBT module to 2000V
- 8kW transfer molded modules for industrial motor drives
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
