MENU

3D printer outputs stretchable soft circuits hybridized with SMT parts

Technology News |
By eeNews Europe


Hybrid soft circuits connecting small islands of hard silicon-based electronic components is an approach that has been under investigation for some time. Though the main difficulty in these hybrid approaches is to make reliable connections between the soft rubbery circuit areas and the hard rigid pins of silicon devices. Sometimes, this is done by creating progressively thicker and firmer pad areas which will receive the hard components, from there, meandering circuit patterns can alleviate the stress on the connection and on the conductive tracks too. Typically, the soft printed circuit parts are first manufactured, and then placed under a pick-and-place machine to receive the hard silicon parts.

SMT parts being placed on a hybrid 3D-printed
flexible circuit.

A new approach taken by researchers from the Wyss Institute for Biologically Inspired Engineering, in collaboration with the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and the US Air Force Research Laboratory consists in layering all the soft circuit compounds using a dedicated 3D printer which can also pick-and-place the hard parts in a last pass.

Key to this hybrid 3D printing is the use of a stretchable conductive ink made of thermoplastic polyurethane (TPU) mixed with silver flakes. Both pure TPU and silver-TPU inks are co-printed to create the devices’ underlying soft substrate and conductive electrodes and ensuring a very strong adhesion and integration. Simple electrode patterns can be printed to create sensors (by monitoring their change electrical conductivity upon stretching) whose data can be processed by a programmable microcontroller.

The novelty is that the same conductive ink dispenser is used as a vacuum nozzle (when empty) to pick-and-place electronic components whose contact pads have first received a blob of rubbery conductive ink. The TPU dots applied beneath each component serve to anchor them and to distribute the stress throughout the entire stretchable circuit matrix.

This trick allows the fully assembled devices to be stretched up to 30% while still maintaining their function, the researchers reported in the Advanced Materials journal. Their paper “Hybrid 3D Printing of Soft Electronics” relates a number of experiments and a proof-of-concept, with the realization of two soft electronic devices.


Strain sensors made using the hybrid 3D-printed
approach, conforming to a bending arm.
Credit: Alex Valentine, Lori K. Sanders,
and Jennifer Lewis / Harvard University.

One was a strain sensor was fabricated by printing TPU and silver-TPU-ink electrodes onto a textile base and combining this with a microcontroller chip and readout LEDs through pick-and-place. The wearable sleeve-like device can indicate how much the wearer’s arm is bending through the successive lighting-up of the LEDs.

The second device was a pressure sensor in the shape of a person’s left footprint, created by printing alternating layers of conductive silver-TPU electrodes and insulating TPU to form electrical capacitors on a soft TPU substrate. The deformation patterns are then processed to make a visual heat map image of the foot when a person steps on the sensor.

The researchers believe their new approach will make customizable wearable electronics both affordable and mechanically robust.

Wyss Institute at Harvard University – https://wyss.harvard.edu

 

Related articles:

Gold nanomesh enables ultra-breathable skin electronics

Stretchable zinc battery promises self-powered wearables

Transparent capacitive touch sensor flexes, stretches and detects 3D shapes

imec laminates stretchable led display onto garments

Ultra-thin, flexible chip features bendable and stretchable interconnects

Solution-based fabrication techniques for flex and stretch electronics


Share:

Linked Articles
10s