3D weld seam inspection camera and software
The systems includes a sensor and a powerful computer with the evaluation software. It captures 3D data that can be used to derive a quality claim objectively based on the measured values.
The software tests the seam position, seam height, seam volume, seam width and length, as well as weld-specific features such as throat thickness, seam binding, edge notch, consistency in length and end craters. The object is also examined for pores, seam irregularities and weld splatters.
The computer unit processes the weld seam images using evaluation software EyeVision 3.0 and depicts the inspection results visually on a display. Users have the possibility to display the results with EyeMultiview, where up to 16 result windows can be displayed at the same time.
Information on the size and position of the defects is recorded in a protocol that can be used for tracing and process optimization. As hardware EVT reccommends its EyeScan SR 3D with a measurement resolution of 100 μm lateral and 10 μm vertical. The scan frequency is 500 Hz max.
Visit EVT Eye Vision Technology at www.evt-web.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
