MENU

3V 16/32/64-Mbit SQI, SuperFlash memories save production time & cost

3V 16/32/64-Mbit SQI, SuperFlash memories save production time & cost

Feature articles |
By eeNews Europe



This family of three, 3V Serial Quad I/O interface (or SQI interface) SuperFlash memory devices, SST26VF, is available with 16-Mbit, 32-Mbit or 64-Mbit of memory, and is manufactured using Microchip’s CMOS SuperFlash technology, for fastest erase times and reliability.

Sector and block erase commands are completed in 18 msec, and a full chip erase operation is completed in 35 msec. Competing devices require 10 to 20 seconds to complete a full chip erase operation, Microchip asserts,making the SST26VF approximately 400 times faster. These fast erase times can provide a significant cost savings, by minimising the time required for testing and firmware updates, and therefore increasing manufacturing throughput.

Microchip’s SQI interface is a low pin count, high-speed 104 MHz quad-bit address and data multiplex I/O serial interface, which allows for high data throughput in a small package. This interface enables low-latency execute-in-place (XIP) capability with minimal processor buffer memory, reducing the overall design footprint compared to traditional parallel memory interfaces. The SST26VF family provides faster data throughput than a comparable x16 parallel Flash device, without the associated high cost and high pin count of parallel Flash. The SQI interface also offers full command-set backward compatibility for the Serial Peripheral Interface (SPI) protocol.

Designed for low power consumption, the SST26VF has standby current consumption of 15 µA, typical, and the active read current at 104 MHz is 15 mA, typical, offering a combination of 3V operation with low power consumption and small-form-factor packaging,

The devices offer 100 years of data retention and device endurance of over 100,000 erase/write cycles. Enhanced safety features include software write protection of individual blocks for flexible data/code protection; the upper and lower 64 kBytes of memory are partitioned into smaller, 8-kByte sectors that can both read- and write-lock. In addition, the devices include a One-Time Programmable (OTP) 2 kByte Secure ID area, consisting of a 64-bit, factory-programmed unique ID and a user-programmable block. These features protect against unauthorised access and malicious read, program and erase intentions. The devices also include a JEDEC-compliant Serial Flash Discoverable Parameter (SFDP) table, which contains identifying information about the functions and capabilities of the SST26VF devices for simpler software design.

The three-member SST26VF family is available in multiple package options, including 8-pin SOIC and SOIJ, 16-pin SOIC, 8-contact WDFN and 24-ball TBGA, as well as in die and wafer form. The 16-Mbit SST26VF016B starts at $0.90, the 32-Mbit SST26VF032B at $1.17 and the 64-Mbit SST26VF064B at $1.84 each (all 10,000).

Microchip; www.microchip.com/SST26VF064B

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s