40A DIN rail power supply has remote control

40A DIN rail power supply has remote control

New Products |
By Nick Flaherty

PULS Power has added a 40A output model to its remote-controlled DIN rail power supply family.

The remote-control feature of the QS40.241 is particularly useful in smart buildings and industrial systems where centralised control of multiple system components is required and allows system administrators and building automation controllers to switch power supplies on or off by use of an external signal switch or transistor gate.

The QS40.241 DIN rail supply has a 24VDC, 40A output and sits alongside the 20A version, the CP20.241-V1. Synchronous rectification technology, a bridgeless PFC circuit and a number of other proprietary design details support and built-in output capacitors for starting heavy loads such as DC motors or capacitive loads. In many cases this allows the use of a unit from a lower wattage class, saving space.

The DIN rail supply has a 100 to 240VAC wide-range Input voltage, width of 125mm and weight of 1.9kg. It has a 94.6 percent efficiency at full load and provides a 50 percent power boost of 1440W for up to 4s and 110A high peak current for 10ms for easy fuse tripping. The DIN rail supply provides full power between -25°C and +60°C and has current sharing feature for parallel use as well as internal data logging for troubleshooting, DC-OK relay contact, shut-down input,

Typical applications include smart buildings and building automation, industrial and process control, panel-building, test and measurement, instrumentation and communications systems. Versions are available approved for railway systems and ruggedised for harsh environments.

“Building automation and the growth of Industry 4.0 requires the use of smart components and sub-systems,“ said Marco van der Linden, UK Country manager for PULS. ”The remote-control feature designed into our DIN-Rail power supplies makes centralised control of multiple system components from a remote location or autonomous AI system very simple to implement and provides a very efficient shut-down facility in the event of system failure or emergency.”

The QS40.241 is ATEX and IECEx approved and has a 3 year warranty. Accessories available include a wall mount bracket, buffer unit and a redundancy module

Related DIN rail power supply articles 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles