40V dual MOSFET in 3.3 x 3.3mm package
Diodes has launched the industry’s first automotive-compliant 40V dual MOSFET in a 3.3mm x 3.3mm package.
The DMT47M2LDVQ can replace two discrete MOSFETs to reduce the board space footprint in many automotive applications, from electric seat control to advanced driver-assistance systems (ADAS).
The package integrates two n-channel enhancement mode MOSFETs with the industry’s lowest RDS(ON) for this configuration – just 10.9mΩ at VGS of 10V and ID of 30.2A. This low on-resistance keeps conduction losses to a minimum in applications such as wireless charging or motor control. The typical gate charge of 14.0nC, at a VGS of 10V and ID of 20A, ensures that switching losses are minimized.
The thermally efficient PowerDI 3333-8 package returns a junction-to-case thermal resistance (Rthjc) of 8.43°C/W, making it possible to develop end applications with a higher power density than with MOSFETs packaged individually. This can reduce the PCB area needed for implementing automotive features, including ADAS.
“The electronic content of vehicles has increased rapidly during the past decade and this has fueled a demand for continuous innovation,” said Ian Moulding, Diodes Incorporated automotive marketing manager. “Our response to this demand has expanded our reputation as a trusted supplier to the automotive sector. The DMT47M2LDVQ is an example of how we are helping the automotive industry address the technical and commercial challenges it faces when developing the next generations of vehicles.”
The dual MOSFET package is qualified to AEC-Q100 Grade 1, supporting PPAP documentation, and manufactured in IATF 16949 certified facilities.
The DMT47M2LDVQ is available now priced at $0.45 in 3000 piece quantities.
Related articles
- 40V SYNCHRONOUS BUCK CONVERTER FOR AUTOMOTIVE PoL
- 250MA LDO FOR NOISE SENSITIVE DESIGNS
- 18V SYNCHRONOUS BUCK CONVERTER TARGETS CONSUMER POINT OF LOAD DESIGNS
Other articles on eeNews Power
- MEMS EV power switch startup raises $44m
- Miniature inductor for automotive power systems
- Test system for wide bandgap semiconductors
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
