MENU

5-pin circuit board adaptor enables multi-pin connectors on PCBs

5-pin circuit board adaptor enables multi-pin connectors on PCBs

New Products |
By eeNews Europe



The circuit board adapter can be pre-assembled on the PCB by following the hole pattern. A 17-pin circuit board connection is then created for the Han DDD module through the connection of two 6-pin adaptors and the new 5-pin circuit board adaptor.
The adaptor can be assembled onto the PCB independently of the connector. After assembly of the PCB, the male or female contact of the Han DDD module is installed in the housing and attached on the pre-assembled PCB. Simple assembly is not the only advantage: the labour involved in wiring is also kept to a minimum. For connection to the circuit board, 17 contacts are available, with the rated values (as per the DIN EN 61984 standard) of 7.5 A for current, 160V for voltage, and 2.5 kV rated surge voltage at pollution grade 3.

Get the data sheet

Visit Harting at www.harting.co.uk

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s