5-W axial fusible wirewound safety resistor offers surge voltage capability up to 6-kV
The device offers a surge voltage withstanding capability up to 6 kV (1.2 µs / 50 µs).
For electric appliances, energy meters, and power supplies, the Vishay Draloric AC05..CS combines a fusing time of < 45 s for a 100 W overload with a special non-flammable silicone cement coating for immediate interruption without flame and explosion when AC mains voltage (230 VAC) is applied.
UL1412 safety approval for the AC05..CS has been initiated and is expected by February 2014. In addition to fusing ‘without a bang’, the safety resistor acts as an inrush current limiting resistor during normal operation. The device’s specially developed non-flammable silicone cement lacquer coating allows designers to meet safety requirements more easily, while eliminating the need to utilize additional fuses in series with the input resistor.
The AC05..CS provides a power rating of 5 W at an ambient temperature of 40 °C and 4.5 W at 70 °C. The RoHS-compliant device offers resistance from 10 Ω to 100 Ω, resistance tolerance of ± 5 %, and temperature coefficient (TCR) of ± 200 ppm/K.
Availability
Samples and production quantities of the AC05..CS safety resistor are available now, with lead times of eight to 10 weeks.
More information about the AC05..CS safety resistor at www.vishay.com/doc?28894
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
