50-Ω 20dB gain block spans 20 MHz to 2 GHz

50-Ω 20dB gain block spans 20 MHz to 2 GHz

New Products |
By eeNews Europe

Two grades are offered, including the A-grade version that is 100% tested and guaranteed to have a minimum of 42.2 dBm OIP3 at 240 MHz, and the B-grade version offering a typical OIP3 of 45.7 dBm at the same frequency. Both input and output are internally 50Ω matched from 20 MHz to 1.4 GHz, with a frequency response of 20 dB power gain and a flatness of better than 0.5 dB. Internal 50Ω matching simplifies design and enables easy cascading, using minimum external components. Each amplifier needs only an input and output DC blocking capacitor, plus a choke to bias its open collector output.

Fabricated using an advanced SiGe BiCMOS process, the LTC6431-20 offers stable performance, while tolerating power supply voltage variations and temperature changes. The device is specified for operation over a case temperature range from -40°C to 85°C.

Use the LTC6431-20 for amplifying IF and RF signals in low distortion transmitters or receivers at frequencies up to 1.5 GHz. It is also suitable for digital predistortion receivers whose performance depends on maintaining low distortion in the signal path. In addition, the amplifier is excellent for a wide range of broadband and narrowband radios that operate in the VHF/UHF bands such as broadcast radios, cable networks, white space data services, low-band LTE base station infrastructure and public safety radios.

The LTC6431-20 comes in a 4 x 4mm QFN package and uses 93 mA from a single 5V supply. The A-grade version is priced starting at $4.89, and the B-grade version at $1.89 (1000)

Linear Technology;

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles