MENU

5W AC/DC in 1 in. x 1 in. case size

5W AC/DC in 1 in. x 1 in. case size

New Products |
By eeNews Europe



There is therefore a need for efficient, compact, reliable and economic AC/DC supplies, says Recom, offering this low cost 5W AC/DC converter in a 1″ x 1″ (2.54 x 2.54 mm) package, for a power density of 7.7 Watt/inch³. The RAC05-K series are designed to supply IoT and factory automation applications. Recom claims cost savings of up to 50% compared to similar products. Their low no-load power consumption of 75 mW and light load efficiency suit hem for “always-on” IoT systems. Standard output voltages are 3.3, 5, 12, 15 and 24 VDC with sufficient power to operate relays, data gateways and building automation nodes. A universal mains input voltage range from 85 VAC to 264 VAC makes them suitable for worldwide use. The modules feature a 60 msec hold-up time at 230 VAC input, which means that missing mains cycles do not affect the output. These series operate over a temperature range from -25°C to +50°C at full load (up to +70°C with derating) and are output over-voltage and short-circuit protected. An EMC Class B filter is built in without the need of any additional components. The RAC05-K series are fully certified to UL/IEC/EN60950-1 and UL/IEC/EN62368-1 with CB reports.

 

Recom Power GmbH; www.recom-power.com

 

 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s