60 V synchronous buck-boost LED driver delivers over 100 W of LED power
Similarly, its output voltage can be set from 0 V to 60 V, enabling the LT3791 to drive a wide range of LEDs in a single string. Its internal 4-switch buck-boost controller operates from input voltages above, below or equal to the output voltage, ideal for applications such as automotive, where the input voltage can vary dramatically during stop/start, cold crank and load dump scenarios. Transitions between buck, pass-through and boost operating modes are seamless, offering a well-regulated output even with wide variations of supply voltage. The LT3791’s unique design utilizes three control loops to monitor input current, LED current and output voltage to deliver optimal performance and reliability.
The LT3791 uses four external switching MOSFETs and delivers from 5 W to over 100 W of continuous LED power with efficiencies up to 98.5%. LED current accuracy of ±6% ensures constant lighting while ±2% output voltage accuracy enables the converter to operate as a constant voltage source. The LT3791 utilizes either analog or PWM dimming as required by the application. Furthermore, its switching frequency can be programmed between 200 kHz and 700 kHz or synchronized to an external clock. Additional features include output disconnect, input and output current monitors, open and shorted LED detection and integrated fault protection.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
