600W AC-DC supply shows health of the components inside
The GXE600 can be digitally programmed across a wide range using an RS-485 interface via the Modbus RTU protocol or with a 0 – 6V external voltage. The digital interface also provides the estimated remaining electrolytic capacitor life-time, operating run-time and alarm history to enable remote preventative maintenance indication or fault finding.
Certified to the IEC 60601-1 medical safety standard as well as IEC 62368-1, the target applications for the series are medical, industrial and test equipment requiring quiet operation, fan-less cooling and constant voltage, constant current programmability.
The supplies can be operated as a 24V or 48V fixed output supply, or programmed to be provide a constant voltage, constant current (CV/CC) source. The voltage adjustment range is from 20 to 120% and the current from 20 to 100%. Protection and recovery parameters can be set, as can the rise time slew rate and
The power supplies operate from a wide-range input of 85 to 265Vac with an earth leakage current of <300µA and dual input fuses as standard. They can be used in ambient temperatures of -20°C to +70°C (-40°C start up), derating linearly above 50°C to 50% load at 70°C. Derating or external cooling is required below 170Vac input. The fully featured series also has an isolated 5V 1A standby voltage, remote on/off, DC Good and AC Fail isolated signals, with paralleling capability for up to five units. The case dimensions are a compact 127 x 41 x 254mm (W x H x L). The warranty period is seven years.
The units are safety certified to IEC/EN/ES/CSA 60601-1, IEC/EN/US/CSA 62368-1, IEC/EN/US/CSA 60950-1, EN 62477-1 (OVC III), with CE marking for the Low Voltage, EMC and RoHS2 Directives. Input to output isolation is 4,000Vac (2 x MoPP), input to ground 2,000Vac (1 x MoPP) and 1,500Vac output to ground (1 x MoPP) for suitability with B and BF rated equipment. The units also comply with EN 55011-B, EN 55032-B, FCC Class B, VCCI-B conducted and radiated emissions, meet the EN 61000-3-2 harmonics and EN 60601-1-2 (Edition 4) immunity standards.
www.uk.tdk-lambda.com/gxe600
Related stories:
- TDK BUYS SWISS DIN RAIL SUPPLY MAKER
- 504W AC-DC CONDUCTION COOLED MODULE USES GaN
- CHOICE OF CONVECTION AND CONDUCTION COOLING FOR AC-DC SUPPLIES WITH 3.3V, 4.2V AND 28V OUTPUTS
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
