MENU

60W programmable DALI LED driver dimmable to zero

60W programmable DALI LED driver dimmable to zero

New Products |
By Julien Happich



The units can be programmed for Dali or push dimming and has 5 constant-power models to deliver the full 60W at almost any output current from 385mA to 2100mA. The output signal has been upgraded to use Constant Current Regulation (CCR) with low ripple which provides a higher quality of light allowing each model to offer low flicker free dimming down to 5%. They also provide a 12 V / 200 mA auxiliary output and dim-to-off with ≤ 0.5W standby power consumption, making it suitable for operation with a wide variety of sensors and controls for even greater energy savings. These products all operate over a 90-305 Vac input range and provide excellent power factor correction (0.99 at 120 V and 0.96 at 220 V). The lifetime of these drivers is calculated to be at least 107,000 hours when operating at 80% load with a case temperature of 60°C. Other features include over-voltage and over-temperature protection for both driver and external LED array, short-circuit protection, and an IP20 rated enclosure.

Visit Inventronics at www.Inventronics-co.com 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s