7″ industrial TFT displays in a 15:9 wide aspect ratio
Both the TX18D210VM0BAA and TX18D211VM0BAA feature IPS (in-plane switching) technology, WVGA (800×480 pixels) resolution and a 15:9 wide aspect ratio, with enhanced optical performance and an extended operating temperature range. Viewing angles of up to 170° are supported in all directions (left/right, up/down). The 7.0-inch display features a contrast ratio of 1000:1 and a white LED backlight with a brightness rating of 1200cd/m² and a 50K hour half-brightness lifetime. The optical and environmental specifications of KOE’s Rugged+ display modules are derived from the same demanding standards and quality assurance levels used in automotive grade displays. The display modules have been developed for use under extreme temperature, mechanical shock and vibration environments where guaranteed and consistent display operation is deemed essential, operating in the -40 to +85°C temperature range. The TX18D210VM0BAA features a 40-pin CMOS data interface, while the TX18D211VM0BAA has a 20-pin LVDS data interface. Each module supports 6-bit RGB data which enables a colour palette of up to 262k colours. Mechanical outline is 167.7×109.5×9.0mm for an active display area of 152.4×91.44mm.
Kaohsiung Opto-Electronics (KOE) – www.koe.j-display.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
