700 W half brick DC-DC converter with 28 V output for telecom and wireless Applications
The ADH700 series offers a 28 V nominal output and is designed to support the popular use of LDMOS technology used in high power wireless base station (BTS) deployments.
The module can deliver up to 28.A output current and offers a wide trim range of 14 V to 33 V. Housed in the industry standard half-brick format (2.4 x 2.3 inches or 61.0 x 57.9 mm) the ADH700 series is just 0.5 inch or 12.7 mm high. The dc-dc converter series offers greater than 95 percent typical efficiency and a wide input range of 36 to 65 V. An aluminum baseplate structure gives ADH700 series modules excellent thermal performance. The 28 V model can operate between minus 40 and plus 85 degrees Celsius ambient temperature, and can continue to operate at full power up to 100 degrees Celsius baseplate temperature – all without air cooling. The conversion technology employs 280 kHz fixed-frequency switching to help minimize external EMI filtering requirements.
Other features include remote enable, remote output sense and trim with protection features such as input under voltage lockout, output over current protection, output over voltage protection, and over temperature protection. No minimum load requirement helps to increase reliability and contributes to an MTBF of 2 million hours (calculated according to Telcordia SR-332-2006).
More information is at www.artesyn.com/power
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
