80W DC-DC converter for industrial applications
Cosel has expanded its STMGF DC-DC converter range with an 80W variant for industrial designs.
The STMGFS80 covers all industrial voltages from 9V to 76V and uses the MGFS80 DC-DC converter assembled on a carrier board to fit the same footprint as its 30W predecessor. The DC-DC converter includes terminal blocks, output voltage potentiometer, input filter and extra capacitors and complies with safety standards UL62368-1 and C-UL EN62368-1.
Battery powered industrial applications require very efficient power solutions, and system developers are seeking to reduce the number of references when selecting a power supply. They also want easily mountable power sources such as DC-DC converters within their equipment. The topology gives an efficiency of 92 percent with easy mounting in industrial designs.
The STMGFS80 series is available in two models. The STMGFS8024 operates from 9VDC to 36VDC for 12 and 24V systems, and the STMGFS8048 works from 18VDC to 76VDC, covering industrial 24 and 48V systems. Four output voltages are available, 3.3V/18A ; 5V/16A ; 12V/6.7A and 15V/5.4A and the output voltage can be adjusted by a potentiometer included on the motherboard.
All modules include an ON/OFF remote control function via an interface connector. Negative logic is the standard method used to control ON/OFF via the remote function, although positive logic RC can be provided on request (Option R).
The DC-DC converters can be operated within an ambient temperature range of -20 to +70 degrees centigrade with convection cooling. Depending on the assembly method and ventilation levels across the final equipment, a derating may apply as specified in the technical documentation.
The STMGFS80 series includes overvoltage and overcurrent protection. In the case of overcurrent exceeding 105% rating, the module operates in hiccup mode and automatically recovers when the output current returns to normal.
For safety and galvanic isolation, the STMGFS80 series has 1,500VDC Input and RC to Output, 1,000VDC Input and RC to FG and 1,000 VDC Output to FG.
STMGFS80 can be assembled directly to a customer’s equipment chassis by fixing the base plate using the two mounting holes. It can also be clipped to a DIN rail chassis by ordering the option (N2). Additional options e.g., plastic cover (N1) or combined DIN and cover (N3) will be available early Q2-2022
The open frame STMGFS80 series measures 52 x 29 x 117mm (2.05 x 1.14 x 4.61 inches) and weighs 170g max.
The STMGFS80 series has a five-year warranty and conforms to the European RoHS, REACH and Low Voltage Directives.
www.coseleurope.eu/Products/DC-DC/STMGFS
Related articles
- Cosel opens power R&D centre in Japan
- 3W 3kV DC-DC converter for medical and industrial
- Rugged 80W DC-DC converter has 10 year warranty
- High reliability 40W DC-DC converter achieves 10 year warranty
Other articles on eeNews Power
- Complementary GaN for logic integration
- Infineon, Panasonic team for 650V GaN chips on 200mm wafers
- Dutch startup raises €22m for fast charging pure silicon battery
- Silanna plans own USB-PD controller, wall socket design
- Sunlight builds battery gigafactory in Greece
- Infineon combines IGBT and SiC for complete 22kW motor drive
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
