Active harmonic filters support 690-V systems

Active harmonic filters support 690-V systems

New Products |
By eeNews Europe

An increasing number of energy-efficient electrical consumers are used in industrial applications, including variable speed drives for motor control. The modern technologies contribute to the reduction of electrical energy consumption; however, as an unwanted byproduct of their operation they can negatively affect the power quality.

ECOsine Active harmonic filters deliver a reliable remedy. The filters provide the system with an opposing corrective current immediately, compensating harmonics, phase shift and load-unbalance at the same time. The filters dynamically adapt to changing grid and load situations, providing an optimum compensation performance at all times.
New in the Schaffner product offering are active filters for three phase networks on the level of 690 V/50 Hz or 600 V/60 Hz, often used in heavy industry, chemical industry, mining or oil exploration. The active filters with the designation FN 3420-200-690-3 can be programmed to the specific needs of the application and provide up to 200 A of corrective current. If more is needed, up to 10 units can be paralleled at the same set of current transformers. State-of-the-art power electronics with 3-level technology are at the core of the new filters, helping to significantly reduce power loss. The 690 V active harmonic filters come in sturdy IP54 rated cabinets. A UL-approved version (FN 3420-200-690-3-UL) is currently in preparation.

Visit Schaffner at

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles