MENU

AEC-Q101-qualified transmissive optical sensors in 5.5x4x5.7mm SMD

AEC-Q101-qualified transmissive optical sensors in 5.5x4x5.7mm SMD

New Products |
By Julien Happich



The single-channel TCPT1600X01 and dual-channel TCUT1600X01 sensors feature an increased dome height compared with previous-generation devices, offering more vertical headroom for the code wheel in turn-and-push applications. They can be used as position sensors for encoders in high-temperature environments close to motors, in addition to turn knobs, ignition locks, and adaptive headlights. Both sensors can detect motion and speed. With dual channels, the TCUT1600X01 can also be used to detect direction in applications such as electronic power steering (ESP) systems.

The single-channel TCPT1600X01 includes an infrared emitter and phototransistor detector located face-to-face in a surface-mount package, while the dual-channel TCUT1600X01 includes an infrared emitter and two phototransistor detectors. Both sensors deliver a typical output current of 1.6 mA and operate at a wavelength of 950 nm. The devices feature a 3 mm gap width and apertures of 0.3 mm, and they operate over a wide temperature range of -40 °C to +105 °C. Samples and production quantities of the optical sensors are available now, with lead times of eight to 10 weeks for larger orders.

Visit Vishay Intertechnology at www.vishay.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s