AEC-Q200 isolation transformer targets data buses, networks
Burns has launched a power isolation transformer series with high clearance/creepage distance for network interfaces.
The Model HCT series high-voltage isolation push-pull transformers are AEC-Q200 compliant and designed for isolated interface power for CAN, RS-485, RS-422, RS-232, SPI, I2C, and lower-power LAN. Solutions that simplify isolated interface power are required in a broad range of applications including those designed to meet Industry 4.0 and in low/medium risk medical sensors, communication PHYs and metering. The capabilities of the Model HCT series are also suited to circuits requiring low DC power and any application where isolation from potentially hazardous voltages are needed such as from a high-voltage battery.
The Model HCT series features an input range of 3.3 to 5 V and delivers 3.3 to 15 V and up to 350 mA output, configured in a variety of turns ratios. The series is constructed with a ferrite toroid core for high coupling factor and efficiency. The isolation transformer has low-profile 6.5 mm housing with reinforced insulation, at least 8 mm clearance / creepage distance and 4.2kVac withstanding voltage to provide an elevated degree of isolation from high voltage hazards.
Designed for isolation power supplies using Texas Instruments SN6501 and SN6505B transformer drivers, the HCT isolation transformer series is also compatible with spread spectrum modulation for reduced emissions, and are compliant with IEC 60950-1, IEC 62368-1, IEC 60664-1 and AEC-Q200 standards.
www.bourns.com/products/magnetic-products/transformers-powers
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
