Amplified power divider module offers 8-ways
New Products
|
By
Christoph Hammerschmidt
This module balances a low noise figure with high output power. Other specifications include a VSWR of 2.0:1 maximum (measured 1.1:1 in and 1.25:1 out), Noise Figure of 9.0 dB maximum, 6.0 dB goal (measured 7.9 dB), Input Power P1dB of +13 dBm typical (measured +14.5 dBm).
Survival Input Power is +20 dBm maximum (measured +20 dBm) and Output Port to Port Isolation is 25 dB typical (measured 33 dB minimum). Power supply requirements are +28 V at 750 mA maximum (measured 172 mA).
The module has SMA connectors and has a weight of 140 grams with dimesions of 4.00- x 2.00- x 0.55-inches (10.16- x 5.08- x 1.40-cm).
www.pmi-rf.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
