Analog data card samples 16 channels simultaneously
The ADC offers true differential inputs with software selectable ±5 V and ±10 V bipolar input voltage ranges (one setting for all channels). The sampling rate is up to 200 kSPS and the ADC offers an oversampling capability with digital filter.
The DAC offers software selectable 0-5 V, 0-10 V, ±5 V and ±10 V output voltage ranges (one setting for all channels). The conversion time is typ. 10 µs and the DAC outputs are capable to drive a load of 2 kΩ, with a capacitance up to 4000 pF.
Both ADC and DAC offer programmable sample clocks. External synchronization is possible with a Trigger/Sync RS485 I/O. In addition, each ADC / DAC provides a 1024 sample input / output FIFO with programmable trigger levels. Data transfer on the PCI bus is handled by TPMC530 initiated scatter-gather DMA cycles with minimum host/CPU intervention. All signals are accessible through a HD50 SCSI-2 type front I/O connector.
Each TPMC530 is factory calibrated. The calibration can be automatically applied to data written to and read from the TPMC530.
Software Support (TPMC530-SW-xx) is available for different operating systems. In order to support long term programs, the TPMC530 have a 5 year warranty.
TEWS Technologies is a solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, XMC, IndustryPack® (IP), CompactPCI, standard PCI, PCIe, AMC, FMC, and VME. The company typically addresses cstomers in the areas of industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS applications.
For more information, go to www.tews.com.
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
