Analyser targets intermodulation issues in TETRA
TETRA radio technology is widely used for communications in the emergency services, and cannot tolerate network performance issues such as low data-transmission rates, signal degradation or dropped calls, all of which can result from PIM distortion.
Available in the UK from Link Microtek, this instrument comes in three standard models covering different frequency bands around 400 MHz. It offers a variety of test modes for different tasks, including field measurement mode, analyser, multi PIM display, Rx sweep, PIM vs time, and single-carrier mode for insertion-loss and coverage measurements.
The S1L TETRA MK2 achieves a high PIM sensitivity of -165 dBc, a low receiver noise level of -132 dBm and a wide dynamic range of 96 dB. The two measurement signals’ fully adjustable output power range of 16 to 44 dB ensures that testing is carried out in compliance with the IEC 62037 international standard. Test results can be stored in PDF, BMP screen-shot or CSV file formats.
For the field and in the test laboratory, the PIM analyser features a robust enclosure with 10.2-in. touch-screen display, as well as an RF test port, an Ethernet port and three USB ports for input devices or external data storage. The unit has an operating temperature range of 0 to 45 degC.
An optional embedded module provides functionality for DTP (distance to PIM), DTF (distance to fault), return loss and VSWR measurements, and the range of available accessories includes low-PIM cables and adapters, PIM loads and a PIM generator for quick system tests.
Link Microtek; www.linkmicrotek.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
