Anritsu teams for first 5G vehicle OTA RF test system
Anritsu worked with Toyota subsidiary Microwave Vision Group (MVG) to deliver its MT8000A test set and OTA system to Toyota as the world’s first 5G vehicle OTA RF test system.
Driverless cars need simultaneous communications with the surrounding environment, including other vehicles, road infrastructure, networks, etc. In particular, introduction of 5G supporting large-capacity, low-latency, massive connections are key technology to transferring the large data volumes generated by various sensors, such as vehicle cameras, as well as for 3D high-definition mapping data. Consequently, car manufactures, and Telematics Unit suppliers are pushing forward with development of 5G communications products.
However, before release, the connected vehicle communications performance must be tested and verified in an OTA environment simulating the actual environment as possible.
The MT8000A is a 5G base-station simulator for 5G RF and protocol measurements as well as application tests. It supports high-order 4×4 MIMO and carrier aggregation (8CA) technologies for fast, large-capacity communications. As well as focusing on smartphone testing, it covers a wide application range, including 5G communications function tests and evaluations of antennas and high-frequency parts.
To characterize an antenna, it is necessary to measure its radiation patterns to determine how well, and in which direction, it radiates. To quickly obtain reliable 3D radiation patterns, antenna performance tests are moving towards Over-The-Air (OTA) test solutions to obtain fast and reliable measurements at the system level.
For OTA measurements, the tests are performed through a radio communication tester and are conducted using a near-field measurement method in an anechoic chamber to block external electromagnetic fields and to simulate realistic and complex RF scenarios. MVG offers OTA measurement solutions specifically designed for the complete verification of automotive wireless performance. A high precision positioning system with controller and turntable provides continuous on-the-fly measurements of directivity, gain and efficiency.
“To deliver a full-vehicle OTA test solution that meets the needs of current and future vehicle testing, we needed to integrate a radio communication test system supporting 5G frequencies. We believe that MVG OTA test environment combined with the Anritsu MT8000A is the right combination to meet the test needs of tomorrow’s connected vehicles,” said Per Iversen, Chief Technology Officer at MVG.
- Anritsu, dSPACE to collaborate in 5G automotive test
- Bluetest, Anritsu team for OTA measurement of WiFi 6E
- Anritsu, Orolia to launch 5G A-GPS Carrier Acceptance Testing
Other articles on eeNews Europe
- Microsoft to host secure design tools in the cloud
- IBM charts path to 1000 qubit quantum processor with new performance metric
- Ultraleap raises £60m to take on the metaverse
- Renesas enters the FPGA business
- TI to build up to four new 300mm fabs in Texas
- European memory company formed