MENU

‘Aqueous solar flow’ battery lasts longer

‘Aqueous solar flow’ battery lasts longer

Technology News |
By eeNews Europe



In the Journal of the American Chemical Society, the Ohio State University researchers report that their patent-pending design, which combines a solar cell and a battery into a single device, is capable of producing 20 percent of its energy from sunlight, which is captured by a novel solar panel on top of the battery, explained Yiying Wu, professor of chemistry and biochemistry at Ohio State.

In tests, the researchers compared the solar flow battery’s performance to that of a typical lithium-iodine battery. The researchers charged and discharged the batteries 25 times. Each time, both batteries discharged around 3.3 volts.

The difference was that the solar flow battery could produce the same output with less charging. The typical battery had to be charged to 3.6 volts to discharge 3.3 volts. The solar flow battery was charged to only 2.9 volts, because the solar panel made up the difference. That is an energy savings of nearly 20 percent.

The device’s solar panel is now a solid sheet, rather than a mesh as in the previous design which was created in 2104. Another key difference comes from the use of a water-based electrolyte inside the battery.

Because water circulates inside it, the new design belongs to an emerging class of batteries called aqueous flow batteries.

“The truly important innovation here is that we’ve successfully demonstrated aqueous flow inside our solar battery,” said Yiying Wu, professor of chemistry and biochemistry at Ohio State University.

The device claims to be the first aqueous flow battery with solar capability. Or, as Wu and his team have dubbed it, the first ‘aqueous solar flow battery’.

“It’s also totally compatible with current battery technology, very easy to integrate with existing technology, environmentally friendly and easy to maintain,”  added Wu.

"This solar flow battery design can potentially be applied for grid-scale solar energy conversion and storage, as well as producing ‘electrolyte fuels’ that might be used to power future electric vehicles,” said Mingzhe Yu, lead author of the paper and a doctoral student at Ohio State.


Previously, Yu designed the solar panel out of titanium mesh, so that air could pass through to the battery. But the new aqueous flow battery does not need air to function, so the solar panel is now a solid sheet.

The solar panel is called a dye-sensitized solar cell, because the researchers use a red dye to tune the wavelength of light it captures and converts to electrons. Those electrons then supplement the voltage stored in the lithium-anode portion of the solar battery.

Something has to carry electrons from the solar cell into the battery, however, and that is where the electrolyte comes in. A liquid electrolyte is typically part salt, part solvent; previously, the researchers used the salt lithium perchlorate mixed with the organic solvent dimethyl sulfoxide. Now they are using lithium iodide as the salt, and water as the solvent. (Water is an inorganic solvent, and an eco-friendly one. And lithium iodide offers a high-energy storage capacity at low cost.)

“We hope to motivate the research community to further develop this technology into a practical renewable energy solution,” added Wu.

The team’s ultimate goal is to boost the solar cell’s contribution to the battery past its current 20 percent – maybe even to 100 percent.

“That’s our next step,” Wu said, “to really achieve a fully solar-chargeable battery.”

Related articles and links:

www.osu.edu

News articles:

World’s first solar battery promises cost savings

World’s first solar battery promises cost savings

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s