Arasan Chip Systems is first to unveil MIPI RFFE core
The Arasan MIPI RFFE Solution provides everything required for integrating RFFE solutions – IP core, Verification IP, software drivers and hardware development platform. The IP core includes RMM-compliant synthesizable, OVM verified RTL. The IP core provides enhanced programmable features for minimizing application complexity and pre/post message processing. The solution can be easily integrated into any design project and customized for a native interface or bridging function. A Verification IP for RFFE is also available to accelerate verification and testing of your system. Software drivers are readily available in Linux and can be ported to a variety of different OS platforms.
The Radio Frequency Front End (RFFE) was developed by the MIPI standards committee as a means of controlling multiple transceiver systems. RFFE was developed as a standard control for front-end elements of radios such as power amplifiers, low-noise amplifiers, switches, sensors and antenna tuners.
RFFE uses a two-wire, serial interface connecting radio terminal to front-end modules. The standard defines all the electrical characteristics and protocol requirements for communication among the Masters and Slaves on the bus. The RFFE includes a hardware development kit and software drivers. The products seamlessly integrate to offer a "Total IP Solution" to implementing an REEF MIPI solution.
The Arasan RFFE IP solutions, including IP core, VIP, software drivers and hardware development kit is available immediately for licensing.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.