Automated Test Solution for Automotive Ethernet Receivers at 1G Speeds | Keysight

Automated Test Solution for Automotive Ethernet Receivers at 1G Speeds | Keysight

By eeNews Europe

Keysight announced the first automated test solution for automotive Ethernet receivers (Rx) at 1G speeds, enabling Tier 1, OEM, chipset vendors, and other automotive suppliers in the ecosystem, to improve time to market and achieve IEEE and OPEN Alliance compliance. 

Autonomous vehicles promise to change the nature of commercial and passenger transportation over the roadways. Within new vehicles, data speed and bandwidth requirements are increasing. With the development of automotive Ethernet, faster data communications are possible and the increasing demands for today’s vehicles and future connected vehicles can be met. However, higher speeds can result in data loss, possible interference, and greater risk of missed packets or incorrect information.  

To address this growing challenge, Keysight has developed a new automotive Ethernet Rx test software that verifies that information is received as intended. It performs complete bit error rate (BER) count to ensure the device-under-test (DUT) maintains a BER of less than 10-10 and meets the signal quality requirements of the IEEE Std 802.3bp and the Open Alliance 1000BASE-T1 Interoperability test suite specification. 

In addition, it performs an Alien Crosstalk Noise Rejection test, which saves hours of valuable time with an automated test of IEEE and required OPEN Alliance compliance specifications, as well as the following:

A wizard for quick setup, configuration and test; 

  • Easy calibration of the test set up;
  • Quick interaction with DUT, as well as required receiver tests;
  • Built on functional and multipurpose hardware – Keysight 81160A Arbitrary waveform generator – which can be fully utilized for other tasks and tests when not actively on. 

Keysight’s Automotive Ethernet solutions suite provides the hardware, software, cables and accessories needed to enable compliance tests.

Additional information is available at

A selection of eeNews articles on automotive ethernet can be found here:


If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News