Automotive 3-ph BLDC motor controller with sensorless feedback

Automotive 3-ph BLDC motor controller with sensorless feedback

New Products |
By Graham Prophet

LV8907UW operates over 5.5 to 20V (4.5 to 40V transient), integrates gate drivers for six N-channel MOSFETs, and a dual-stage charge pump for 100% duty-cycle operation. In its lowest cost configuration the IC can operate without an external microcontroller. The device requires no programming, as key parameters and functions – such as startup and speed setting – can be configured via SPI interface and stored in embedded non-volatile (OTP) memory. Open-loop and closed-loop speed control are possible. For more complex applications the LV8907UW can also support a small microcontroller with its integrated linear regulator (3.3V or 5V, 50 mA), a local interconnect network (LIN) transceiver for automotive connectivity, and a watchdog timer.


AEC-Q100 qualified, the LV8907UW’s operational temperature range extends to 175°C, for automotive environments. Integrated protection mechanisms include over-current, over-voltage, short circuit, under-voltage, and over-temperature. ON suggests use in automotive water pumps, oil pumps, fuel pumps, HVAC systems, radiator fans, and headlamp cooling units.


In a SQFP48K package format it is priced at $5.55 (2500).


ON Semiconductor;



If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles