The company claims the new product is the first power supply that can be connected directly to the generator voltage without need for an intermediate transformer. The power supply features optical indicators to display the status and condition of the unit. Since it tracks dynamic loads, power supply can be operated continuously even under high load conditions. This makes reserves of 30 to 50% no longer needed.
Special sensors in combination with a microcontroller continuously monitor wear factors in the power supply such as temperature, overload, faults and other conditions. Intelligent evaluation of these parameters then gives the user an overview of the status of the unit for implementing maintenance measures, thereby drastically reducing the probability of failure of the overall system. Colored LEDs in traffic light colors provide the user with continuous information about the current load level, the stress level as well as the life time, a forecast of remaining life expectancy. The indicators are bright enough to be reliably seen and interpreted from several meters away.
For the first time ever the usual 3-phase transformer used in wind power equipment can be dispensed with, thereby saving money. Thanks to its broad input range of 380 – 690 V the switched-mode power supply can be connected directly to the generator voltage of the wind turbine. The new unit reduces the number of failure-prone parts along and increases the efficiency of the system due to less heat loss.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.