Bi-direction autofocus cameras actuator drives large lenses
For a device to take sharp, high-resolution photos it requires a powerful image sensor, as well as a large-diameter imaging lens for collecting as much light as possible. At the same time, smartphones require their electronic components to help save battery by consuming little power.
Responding to these challenges, ALPS has developed the ATMJ1Z7 Series Bi-direction Type Autofocus Actuator, which is available in two types, supporting large lenses with a diameter of either 7.05 mm (for 16-megapixel resolution) or 8.0 mm (for 20-megapixel resolution). Both types have the same specifications and dimensions of 10 × 10 × 4.3mm. This makes it easy to switch to the larger lens, helping to reduce the design workload.
Whereas existing lens-drive actuators are preload types, driving the lens in only one given direction (uni-directionally) using a positive current, the ATMJ1Z7 Series sets the initial position of the lens at a frequently used focal distance (position) and adjusts focus by moving the lens from that point in one direction or the other (bi-directionally) depending on whether the current is positive or negative. This shortens the distance the lens has to travel, thereby lowering the amount of power required to move the lens.
Furthermore, original mould design and automated machine design technologies have been applied to put in place a high-quality production system with extremely low variance. High precision is also realised, with a tilt of less than one tenth of a degree during lens drive.
Applications, as well as in camera modules for smartphones, lie in camera-integrated office equipment. The actuator delivers a troke (when facing upward): ≥ +300 µm (@ +100 mA, ≤ -50 µm (@ -20 mA)
ALPS Electric; www.alps.com
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
