Bluetooth 5.2 multiprotocol SoC supports USB 2.0

Bluetooth 5.2 multiprotocol SoC supports USB 2.0

New Products |
By Rich Pell

The SoC also includes a Full Speed (12 Mbps) USB 2.0 interface. The nRF52820 is built around a powerful 64-MHz 32-bit Arm Cortex-M4 processor and includes 256 KB Flash and 32 KB RAM making it suitable for a wide range of commercial and industrial wireless applications including professional lighting, asset tracking, HID, and gaming products.

In addition, when paired with an application MCU, the nRF52820’s fully-featured multiprotocol radio and +8 dBm output power makes it an ideal network processor for gateways and other smart home applications requiring advanced wireless connectivity. The nRF52820 is qualified for operation across an extended industrial temperature range of -40 to 105 °C, making it suitable for commercial and industrial applications, including professional lighting.

The 12 Mbps USB connectivity makes device firmware updates (DFU)-over-USB practical. In addition to the main supply regulators, the USB peripheral in the nRF52820 includes a dedicated regulator for converting the 5-V VBUS signal to the 3.3 V needed for the USB signaling interface, eliminating the cost and space required for an external regulator. The nRF52820 includes up to 18 GPIOs and a range of analog and digital interfaces such an analog comparator, SPI, UART, TWI, and QDEC.

The supply voltage covers a 1.7 to 5.5-V input range, allowing the nRF52820 to be powered by coin-cells and rechargeable batteries. When connected to a USB host, the nRF52820 can be directly powered by the always-present 5 V VBUS signal. Nordic provides a reference layout for this configuration. nRF52820 engineering samples are available now in a 5×5 mm QFN40 package.

Nordic Semiconductor –

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News


Linked Articles